User Manual

TS-1000 Loop Back Test Result
Result
Display the TS-1000 Loop Back Test Result. Fail or Pass.
Result counter
Display the value of Counter Result.
Table 4-14 Descriptions of the TS-1000 Loop Back Test Web Page Screen Objects
#Notice:
Please use the PLANET FT-90Xv2 or GT-80X and GT-90X as the Remote device.
4.7.4 802.3ah Setup
When enable 802.3ah OAM function, all 802.3ah OAMPDU packets will trap to embedded CPU.
Software will implement auto discovery procedure. With hardware support, software controls the 802.3ah remote loop back
procedure. Hardware can also detect dying gasp even and interrupt CPU to send dying gasp even notification OAMPDU.
All other functions defined by 802.3ah are implemented using embedded CPU.
When remote device is in loop back mode, hardware can support change looped test frame’s DA, SA or both as user
defined. Hardware can also set to don't change looped test frame.
This function provides 802.3ah Setup of Managed Media Converter. Press the “Apply” button to save the current
configuration of Managed Media Converter. The screen in Figure 4-39 appears and Table 4-15 describes the 802.3ah
Setup object of Managed Media Converter.
Figure 4-39 802.3ah Setup Web Page screen
-45-