FT-80x-Series Datasheet

ManualsBrandsPLANET Technology ManualsMedia Converters10/100TX - 100Base-FX Fiber Media Converter (SM, SC, 15km, LFPT)

Data Sheet

FT-80x Series

10/100BASE-TX to 100BASE-FX Bridge Media Converters

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX

shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex

operations and a variety of ber options. The converter auto-adapts to the highest level

of performance supported by the device connected to the STP port. When the device

is a switch or a workstation that supports full duplex, the converter adapts to the full-

duplex mode and provides an effective 200Mbps bandwidth. When the connected device

is a hub or a workstation that supports only half duplex, the converter adapts to the

half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch

provides total manual control over the half/full-duplex operation in fiber-optic interface.

The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or

WDM connectors. Multi-mode models that support distances up to 2km and single-mode

models that support distances up to 15/20/35/50/60km are available.

The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the

DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the

link media and provide efficient solution to monitoring the net. The DIP switch provides

the disabling or enabling of the LFP function.

LLCF (Link Loss Carry Forward) means when a device is connected to the converter

and the TP line loses the link, the converter's fiber will disconnect the link of transmit.

LLR (Link Loss Return) means when a device is connected to the converter and the

fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can

immediately alarm administrators the problem of the link media and provide efficient

solution to monitoring the net.

Features

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX,

100BASE-FX standard

• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair,

EIA568

• One ber-optic, 1310nm wavelength, connector type and

distance vary with model

–

FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm

–

FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm

• Data Transfer Rate:

–

TP: 10/100Mbps

–

FX: 100Mbps

• Duplex mode support:

–

Full or half-duplex mode by auto-negotiation (TP)

–

Full or half-duplex mode by DIP switch (FX)

• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100,

TP LNK/ACT, TP FDX/COL

• DIP switch: 2 DIP switches

–

Rear DIP switch: FX duplex mode selection

–

Side DIP switch: LFP (Link Fault Pass-through) mode

selection

• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure

in Half-Duplex eliminate the loss of packets

Summary of content (4 pages)

PAGE 1
FT-80x Series 10/100BASE-TX to 100BASE-FX Bridge Media Converters Features • Complies with IEEE 802.3, IEEE 802.
PAGE 2
FT-80x Series Applications Standalone and Centralized Management Media Converter Installation To meet the demand for the growing network, PLANET FT-80x has provided the advanced media conversion technology. The FT-80x media converter provides various fiber connecting types to meet different network applications. It is very flexible for the FT-80x to work as a standalone device or install into the central standard media converter chassis for providing centralized power.
PAGE 3
FT-80x Series Specifications Product FT-80x Series Protocol IEEE 802.3, 10BASE-T IEEE 802.3u, 100BASE-TX IEEE 802.3u, 100BASE-FX IEEE 802.3x, Flow Control Dimensions (W x D x H) 97 x 69 x 26 mm Weight 0.2kg Power Input 5V DC, 2A, max.
PAGE 4
FT-80x Series Maximum Input Power (dBm) FT-801: -14 FT-802: -14 FT-803: -14 FT-802S15:0 FT-802S35:0 FT-802S50:0 FT-806A20:0 FT-806B20:0 FT-806A60:0 FT-806B60:0 Supported Distances and Functions Shielded Twisted-pair Multi-mode Fiber Optic Single-mode (SM) Port Mode 100m (328 ft.) 412m (1,350 ft.) (half-duplex) 2km (1.2 miles) (full-duplex) 412m (1,350 ft.