FST-80x Series Datasheet

C-FST-80x

PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-2219-9518 Fax: 886-2-2219-9528

Email: sales@planet.com.tw www.planet.com.tw

PLANET Technology Corporation

FST-80x

DIP Switch

DIP-1: Fiber full / half duplex mode

DIP-2: Copper forced mode / auto-negotiation mode

DIP-3: Copper speed 10Mbps / 100Mbps

DIP-4: Copper full / half duplex mode

DIP-5: Fiber LLR (Link Loss Return) enable / disable

DIP-6: Fiber LLCF(Link Loss Carry Forward) enable / disable

LED Indicator

System: PWR

TP: LNK/ ACT, FDX/ COL, 100

FX: LNK/ ACT, FDX/ COL

Power Input DC 5V, 2A

Power Consumption 6.2 watts/ 21 BTU (maximum)

Dimensions (W x D x H) 94 x 81 x 26 mm

Weight 0.22kg

Cable

10BASE-T: 2-pair Cat3, 4, 5 UTP cable, up to 100 meters

100BASE-TX: 2-pair Cat5 UTP cable, up to 100 meters

100BASE-FX:

-50/ 125μm or 62.5/ 125μm multi-mode ber cable, up to 2km

- 9/ 125μm single-mode cable, providing long distance of 15/20/35/50/60km

Operating Environment 0~50 degrees C, 5~90% RH

Storage Environment -10~70 degrees C, 5~90% RH

Emission

FCC Class B, CE mark

Ordering Information

FST-801

10/100BASE-TX to 100BASE-FX (ST, MM) Smart Media Converter -- 2km

FST-802 10/100BASE-TX to 100BASE-FX (SC, MM) Smart Media Converter -- 2km

FST-802S15 10/100BASE-TX to 100BASE-FX (SC, SM) Smart Media Converter -- 15km

FST-802S35 10/100BASE-TX to 100BASE-FX (SC, SM) Smart Media Converter -- 35km

FST-802S50 10/100BASE-TX to 100BASE-FX (SC, SM) Smart Media Converter -- 50km

FST-806A20* 10/100BASE-TX to 100BASE-FX (SC WDM, SM) Smart Media Converter -- TX:1310nm-20km

FST-806B20* 10/100BASE-TX to 100BASE-FX (SC WDM, SM) Smart Media Converter -- TX:1550nm-20km

FST-806A60* 10/100BASE-TX to 100BASE-FX (SC WDM, SM) Smart Media Converter -- TX:1310nm-60km

FST-806B60* 10/100BASE-TX to 100BASE-FX (SC WDM, SM) Smart Media Converter -- TX:1550nm-60km

Remarks

FST-806A20/806B20 and FST-806A60/806B60 should run in pair, meaning FST-806A20 / FST-806A60 must

be connected at one end while FST-806B20 / FST-806B60 at the other end.