Datasheet

FSD-604HP
6
Specications
Model
FSD-604HP
4-Port 10/100Mbps 802.3af/at PoE + 2-Port 10/100Mbps Desktop Switch
HardwareSpecications
Network Connector 6-port RJ45 for 10/100BASE-TX, auto MDI/MDIX
PoE Inject Port 4-port with 802.3af/at PoE injector function (Port-1 to Port-4)
LED Display
System:
Power (Orange)
Per PoE port:
PoE (Orange, Port-1 to Port-4)
LNK/ACT (Green, Port-1 to Port-6)
DIP Switch
100m distance in standard mode
250m distance in extend mode (based on the cable category)
Switch Architecture Store and Forward switch architecture
MAC Address Table 2K MAC address table with auto learning function
Switch Fabric 1.2Gbps
Switch Throughput 0.89Mpps @64bytes
Maximum Packet Size 1536bytes
Flow Control Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
Power Requirements AC 100~240V, 2A max.
Power Consumption Max. 63 watts, 214 BTU
Dimensions (W x D x H) 168 x 93 x 32 mm
Weight 499g
ESD Protection
Contact discharge of ±4KV DC
Air discharge of ±6KV DC
Surge Immunity ±4KV
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6(-)
PoE Power Output
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
PoE Power Budget 60 watts
Number of PDs, 7 watts 4
Number of PDs, 15.4 watts 4
Number of PDs, 30 watts 2
Standard Conformance
EMI Safety CE, FCC
Standard Compliance
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
Environment
Operating Environment 0 ~ 50 degrees C
Storage Environment -10 ~ 70 degrees C
Operating Humidity 5 ~ 95%, relative humidity, non-condensing
Storage Humidity 5 ~ 95%, relative humidity, non-condensing
Ethernet
Fast Ethernet
Flow Control
Power over Ethernet
Power over Ethernet Plus