802.11g USB2.
Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
Table of Contents CHAPTER1 INTRODUCTION............................................ 5 1.1 Product Introduction...............................................................................................................................5 1.2 Product Package....................................................................................................................................5 1.3 Print Server Outlook & LED Indicators.............................................................................
7.10.2 Ad-Hoc Mode ................................................................................................................................48 7.11 SNMP ..................................................................................................................................................52 7.12 Wizard..................................................................................................................................................53 7.13 Report ...............................
Chapter1 Introduction 1.1 Product Introduction Thank you for purchasing and using our FPS-1010G. This print server allows your printer to become a shared device on the network. It offers printing flexibility and manageability on your Local Area Network at an extremely low cost and with an absolute minimum setup and maintenance required. 1.
Right View Left View Top View LED WLAN ACT LAN 1.4 Status Description On: Indicates wireless interface is enable. Off: Indicates wireless interface is disable. Blink: Data is transferring via wireless interface. Blink: Indicates print server is transfer data to printer. On: LAN port is connected. Off: LAN port is not connected. Blink: Data transferring. Network Printing Architecture This section illustrates how FPS-1010G functions and operates on the network.
Print Server Client User Network Server (optional) Network Printing Environment Client User Unix Print Server Print Server Network Server NetWare ServerWindows NT Server Windows NT Windows 2000 Windows 98 Workstation Detailed examples will then be illustrated through actual network environment. 1.4.
1.4.2 Network Printing Functions for Clients Client User Unix Print Server NetWare ServerWindows NT Server Windows NT Windows 2000 Windows 98 Workstation Common operating systems for clients are classified as following: Windows 95/98/Me/NT/2000/XP Our print server system provides PTPP (Peer-to-Peer Printing) driver and utilities for Windows 95/98/NT/2000/XP users. PTPP (Peer-to-Peer Printing) supports TCP/IP protocol.
In the client installation procedure, after PTPP (Peer-to-Peer Printing Driver) is installed into Windows, the system will automatically (manual configuration is also allowed) search through all the print servers on the network, and then add their printing ports into Windows’ printing port.
1.4.3 Network Printing Functions for Network Server Network Server Unix Print Server NetWare ServerWindows NT Server Windows NT Windows 2000 Windows 98 Workstation Common network servers are classified as following: Windows NT/2000 Our print server system provides PTPP (Peer-to-Peer Printing) driver and utilities for Windows NT/2000. After PTPP is installed, the server can directly print to print server.
Network printing function will become available after PTPP driver is installed into Windows NT/2000. Adding this printing function into Windows NT/2000 Server allows print queue, user authority management, and many other advanced features. NetWare Network (see below) 1.6 Contents of the User’s Manual Chapter 2 explains print server’s hardware installation and configuration. It is strongly recommended for you to read. The following chapters 3, 4, 5, and 6 introduces: Chapter 3.
Chapter 6. UNIX System Network You may select the appropriate chapters and sections to read depending on your network printing’s requirement. Chapter 7 and chapter 8 introduce print server’s management and configuration utilities on Windows and Web Browser’s environment respectively. You may select the appropriate management utility according to the administrator’s computer platform. Chapter 9 introduces Print Server’s IPP Printing function and setup procedure.
C h a p t e r 2 H a r d w a r e I n s ta l l a t i o n 1. 2. 3. 4. 5. Make sure the power is OFF, then connect printer to the Print Server's printer port. Connect the LAN cable to the RJ-45 port of the Print Server. Connect the other end of the LAN cable to a switch or your PC directly. Connect the supplied Power Adapter. Please make sure the LAN LED is light on. NOTE1: The wireless interface of FPS-1010G is “Disabled” by default. If you want to activate wireless interface, please refer to section 7.
C h a p t e r 3 Wi n d o w s P e e r - t o - P e e r Network 3.1 System Architecture Print server supports Windows Peer-to-Peer network printing mode, which is suitable for most medium and small network environments. Through quick and simple installation procedure, users can immediately enjoy the convenience of network printing. Installation procedure is separated into following two parts: 1. Administrator Installation and Setup (refer to section 2 for more detailed information).
2. Click on “Administrator Installation” hyper link to initiate the installation. Or you can click the “Start” button and choose “Run”. (Suppose “E” is your CD-ROM drive). When the dialog box appears, enter “E:\Utility\Setup.exe” and press enter key. You will see the dialog box as below. Please click “Next” to continue. 3. Specify the destination folder where the utility will be installed. Click “Next”. 4. Select the components you want to install.
5. Specify the program folder name where the program icons will be add to. Please click “Next” to start installation. 6. For a while, the program will finish installing utility and driver you selected. Thus far you have completed the installation phase and prepare to configure the Print Server. The “Choose Print Server” dialog box will be displayed as following. Please select the print server and click “Next”.
7. “Name the print Server”, you can assign an easy to memorize name for management. But note that, this name will be the “Identifier” for the Peer-to-Peer Printing.
NOTE: If this is the first time you configure the print server, the “Print Server Name” will be the same as the “Device Name” printed at the bottom of the print server. 8. You can either assign a fixed IP address for the print server or select “Don’t change” for configure it later by the configuration utility. Please click “Next”. 9. Configuration summary will display in this screen. Now, you have completed the “Print Server Setup”.
10. The “Setup complete” window is displayed to indicate that the Administrator Installation procedure is finished. Please click “Finish”.
Now, you have completed the administrator’s setup for most of the network environment. You can then perform the “Client Installation” procedure (section 3.4) on all client’s sides of the network. If you want to print from this administrator’s PC to the print server, all you need to do is to perform Windows’ standard “Add Printer” procedure as described below. Step1. Click “Start” button, choose Setting => Printers Step2. Double click “Add New Printer” Step3. Select “Local printer” => click “Next”.
Step5. Step6. 3.3 Choose the “Print Server’s Network Port” which was created by the administrator installation process and click “Next”. Complete the rest of the questions to finish the network printer setup. Administrator Utilities After Administrator Installation is completed, there will be four utilities in print server’s Program folder. 1.
2. Remote Ports Remote Ports Utility offers a convenient way for you to manage and add printer port of the remote FPS-1010G. From the assistant of this utility, you can print to other FPS-1010G outside the subnet across network segment. However, please note that this function only supports TCP/IP network protocol. Please follow the procedures described below: Step1. Run Remote Ports Utility Step2.
4. Uninstall Assistant for removing all installed administrator software. 3.4 Client Installation and Setup The Client Installation can be performed on Windows 95/98/Me/NT/2000/XP and Serve2003 with the same user interface. Before the installation procedure, please confirm that your PC has connected to the network and installed at least one network protocol (such as TCP/IP or NetBEUI) . The installation is the same as Administrator Installation, besides the step 4.
C h a p t e r 4 Wi n d o w s N T / 2 0 0 0 N e t w o r k 4.1 System Architecture In Windows network environment, other than the Peer-to-Peer network printing architecture described in the previous chapter, we also offer the Server-Based Printing architecture for Windows NT/2000 server. Only one Windows NT/2000 is required to have Windows PTPP (Peerto-Peer Printing) driver installed and share the printing service on the network.
If this is your first time installing print server, please install the administrator software on Windows NT/2000 server first. Refer to section 3.2 for installation instructions. If your network has already installed a working print server and your Windows NT/2000 server has not yet installed the PTPP driver, please install the client software. Refer to section 3.4 for installation instructions. Step2.
C h a p t e r 5 N e t Wa r e N e t w o r k 5.1 System Architecture We implement NetWare print sharing functionality into the print server itself, thus allowing one or more printers attached by a print server to be connected to the network. Embedded print server, which emulates the “queue management functionality” of NetWare print server, PSERVER program running on the NetWare server.
1. Run NetWare’s PCONSOLE program to create a NetWare print server and print queue with the appropriate names. 2. Refer to section 7.7 and use print server configuration utility, to configure print server attach to NetWare server print queue. Print server will get the print job from the print queue and print. 5.2.1 Installation with Pconsole 1. Run the NetWare PCONSOLE program. 2. Change the current file server, if necessary, using the Change Current File Server menu selection. 3.
9. Press Enter to select the newly created print server. 10. Select Print Server Configuration. 11. Select Printer Configuration. 12. Select Printer 0 (or Printer 1, Printer 2), and press Enter, then select Parallel LPT1 (or LPT2, LPT3) in the Type field. If your print server is with only one port, you do not need to configure this Type field. 13. Press Escape, and answer Yes to the Save Changes question. 14.
Chapter6 UNIX System Network 6.1 Introduction The print server is available for TCP/IP printing by Unix LPD (Line Printer Daemon) protocol. The LPD protocol originated with Unix release is based on the BSD version of Unix and supported under most versions of Unix. This chapter explains how to configure the print server for TCP/IP operation, and how to modify configuration files on your Unix system to allow printing to the print server.
recommend that the BOOTP server should be located on the same subnet as the print server. If you use Network Information Services (NIS) in your system, you may need to rebuild the NIS map with the BOOTP services before doing the following BOOTP configuration. To rebuild the NIS map, please refer to your system documentation. To configure the IP address data for the BOOTP server, you will need to log in the host of BOOTP server as the superuser (root). Perform the following steps to add address entries. 1.
6.5 Configure Remote LPD Printing on the Host The procedure you use to configure your Unix host(s) to allow printing to your network remote print server varies between different varieties of Unix. The procedure below can be used for Unix variants that are related to BSD Unix, such as SunOS or Linux. For other versions of Unix, consult your system documentation, keeping in mind that: 1. The print server should be treated as a BSD networked print server host. 2.
The rm= entry should correspond to the IP address you have assigned to the print server. You can also use a host name if you have assigned one in the /etc/hosts file. The sd= entry should correspond to the spool directory you created in the previous step. The rp= entry should correspond to the port name of the remote printer. The values should be one of lpt1, lpt2 or lpt3 depends on the printer port. The print server should now be available for printing from your Unix host.
Chapter7 Configuration Utility 7.1 Introduction This chapter introduces FPS-1010G system configuration utility in Windows environment. This utility is automatically installed during Windows Administrator Utility installation procedure - refer to section 3.2 and 3.3. This utility provides the most complete management and configuration functions on FPS-1010G.
7.2 Search for All Available Print Server Every time when you run print server’s configuration utility, click the “Search” icon on the tool bar. The configuration utility will delay for several seconds because the utility is using system’s available network protocols to search for all print servers on the network. All available print servers will be listed under “Print Server Group” on the left side of the window. You must select the print server you would like to configure from the list.
7.3 Status of Print Server Click “Status” icon on the tool bar, the status of the current selected print server will be showed on the right side of the window. The information of the print server displayed are MAC ID, model type, firmware version, status of each printer port, NetWare file server name, NetWare file server polling interval, NetWare printer queue names, IP address, subnet mask, default gateway, AppleTalk printer type, AppleTalk zone and print server printing ability…etc.
7.4 Setting up the Print Server Click “Setup” icon on the tool bar, the setup items of the current selected print server will be showed on the right side of the window. You can modify all settings of the print server here. When you first time into one the configure options, system will ask you enter Password. The default Password are “1234”.
7.5 General Configuration Double Click “General” icon and the General configuration window will pop-up. You can see basic print server information in this page. You also can configure the “Print Server Name”, “User Name” and “Password” here. Printer Server Name: Name of the print server. You can use this name to identify the print server when you are searching for the print server by the administration and client utilities. SMB Group Name: Name of your network.
7.6 TCP/IP Configuration Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up. If there is a DHCP Server in your LAN. You can configure the print server to automatically obtain an IP address from DHCP server. Or you can manually specify a static IP address to this print server . If you need the print server to automatically obtain an IP address from LAN DHCP server, select “Auto IP”.
7.7 Netware Configuration Double Click “NetWare” icon and the NetWare configuration window will pop-up. This print server supports NetWare Bindery Printing method. The print server periodically polls the NetWare server printer queues for printing jobs. You have to assign the NetWare server name, print server polling interval and the name of queue on the NetWare server for each printer port. Polling Time is the polling interval of the print server for waiting printing jobs on the NetWare server.
7.8 AppleTalk Configuration Double Click “AppleTalk” icon and the AppleTalk configuration window will pop-up. AppleTalk is a data communication protocol often used by Macintoshes. The print server can use these parameters to join the AppleTalk network and share the printer to other AppleTalk workstations. You have to setup the “Zone Name” and “Printer Type” for each printer port of this print server. Zone Name: Print server has to join zones of AppleTalk before it can be shared to other workstations.
7.9 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you can select to enable/disable each printing protocol, assign name for each printer port of this print server and upgrade the new firmware for this print server. Upgrade Firmware: You can use this “Upgrade” tool to update the newest firmware of the print server. Click button and select the correct firmware in you PC’s storage.
7.10 Wireless Due to wireless interface is “Disable” in default. If you want to use the print server through wireless interface, please set up the print server through Ethernet firstly and make sure your wireless LAN settings are correct and Wireless Function is set to “Auto”. After configure the wireless LAN settings, unplug the Ethernet cable and power off/on the print server, then you can start to use the print server via wireless interface.
2. When you are select first option to continue, you will see this screen for scan the wireless network. Please select the wireless device that you want to connect and click “Next”. If you don’t have see the wireless device that you would like to connected, please click “Scan” to search again. 3. This print server supports WEP and WPA-PSK security mode. If you want to use WEP encryption to protect your wireless network, you have to select “WEP(ASCII)” or “WEP(HEX)”.
If you want to use WPA-PSK, you have to select “WPA-shared key”. The wireless security setting should be the same with other wireless devices in the same network.
You can select “64 bit” or “128 bit” length and “Hexdecimal” or “ASCII” format for the encryption key. Longer key length can provide stronger security but worth communication performance. Enter four key values by following the rules below and select one key as the default key. PassPhrase – A passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for the print server. This setting is only valid when the security mode is in “WEP(HEX)”.
WPA-shared key Security Mode: Wh en “WPA-sh are d ke y”, a lso na me d “W PA- PSK” r eq uires users to s elect th e ad vance d encr yp tion me th ods , i.e . T KIP an d en te r a s e t of s h a r e d k e y. WPA Algorithms - TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets. This insures much greater security than the standard WEP security. Shared Key - Enter 8 to 63 digits of ASCII format to be the key for the authentication within the network.
4. You can select to let the print server automatically obtain IP settings from DHCP Server or manually assign the IP settings. If you manually assign the IP settings, you have to enter IP address, subnet mask and default gateway address. When you finish configuring the IP settings, click “Next” to confirm the IP Address configuration. 5. Please click “Save” to save the wireless configuration.
7.10.2 Ad-Hoc Mode 1. If you are select “Ad-Hoc Mode” and click “Next” in section 7.11, you will see the dialog box below. You can let the print server automatically associate with other wireless station or manually assign the SSID of your wireless network. You can let the print server automatically select the channel that is the same with the peer or manually assign a channel. 2. When you are select first option to continue, you will see this screen for scan the wireless network.
3. This print server supports WEP and WPA-PSK security mode. If you want to use WEP encryption to protect your wireless network, you have to select “WEP(ASCII)” or “WEP(HEX)”. If you want to use WPA-PSK, you have to select “WPA-shared key”. The wireless security setting should be the same with other wireless devices in the same network.
You can select “64 bit” or “128 bit” length and “Hexdecimal” or “ASCII” format for the encryption key. Longer key length can provide stronger security but worth communication performance. Enter four key values by following the rules below and select one key as the default key. PassPhrase – A passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for the print server. This setting is only valid when the security mode is in “WEP(HEX)”.
Wh en “WPA-sh are d ke y”, a lso na me d “W PA- PSK” r eq uires users to s elect th e ad vance d encr yp tion me th ods , i.e . T KIP an d en te r a s e t of s h a r e d k e y. WPA Algorithms - TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets. This insures much greater security than the standard WEP security. Shared Key - Enter 8 to 63 digits of ASCII format to be the key for the authentication within the network.
5. Please click “Save” to save the wireless configuration. 7.11 SNMP Do ub le C l ick “ SNMP” icon and the SN MP c on fig ura tio n w ind ow will pop up . Contact: You can enter the print server administrator’s contact information here. This information will be displayed in the SNMP management tool. Location: You can enter the installed location of the print server here. This information will be displayed in the SNMP management tool.
7.12 Wizard Click “Wizard” icon on the tool bar, the setup wizard item of the current selected print server will be showed on the right side of the window. Double click the “Print Server Wizard”, the setup wizard will guide you through all the setup process from next page.
Step 1: Setup the Print Server Name and SMB Group Name of this print server and the name of each printer port. Please refer to section 7.5 and 7.9 for detail information. Step 2: Select to enable required printing protocol. Please refer to section 7.9 for detail information.
Step 3: Setup the IP of this print server. Please refer to section 7.6 for detail information. Step 4: Setup the NetWare printing. Please refer to section 7.7 for detail information.
Step 5: Setup the AppleTalk printing. Please refer to section 7.8 for detail information. Step 6. Setup Status Summary. This screen will show you the total settings of this print server. If those settings are correct, please press “Set” for next step to save the settings or press “Cancel” or “<
Step 10. Please press “Yes” to save the settings.
7.13 Report Click “Report” icon on the tool bar, the Report window will pop-up. The report list basic information of all available print servers on the network. The information includes Device Name, MAC ID, Model Type, Firmware Version and Status of print server.
C h a p t e r 8 We b M a n a g e m e n t 8.1 Introduction Print server can be configured and managed on the web browser. Through Local Area Network, or even Internet when this print server has an legal IP address. Administrator can easily configure and manage print server’s various main functions in web browsers. Simply enter print server’s IP address into your browser’s address field to manage a print server by print server’s built-in Web Server. 8.2 Web Management of Print Server 8.2.
8.3 Device Status 8.3.1 System In this page, it will show you all the system information such as “Device Name”, “Print Server Name”, “Model Type”, “Firmware Version”, “MAC Address” and other information. 8.3.2 Printer This page will display the information of printers connected to all printer ports.
8.3.3 TCP/IP This page lists all TCP/IP Settings, include “IP Address”, “Subnet Mask” and “Gateway”. 8.3.4 SMB This page will show the SMB Group Name.
8.3.5 SNMP This page will show the SNMP System Contact and SNMP System Location. If the settings are empty, this page will show you the settings “Disabled”. 8.3.6 NetWare This page lists NetWare settings, include “Polling Time”, “Use Bindery Mode”, “Name of the File Server” and “Queue Name of each Port”.
8.3.7 AppleTalk This page lists AppleTalk settings, include “AppleTalk Zone Name” and “Printer Type of printers connected to all print ports”. 8.4 Setup Wizard 8.4.1 System You also can configure the “Print Server Name”, “User Name” and “Password” here. Printer Server Name, the name of the print server. You can use this name to identify the print server when you are searching for the print server by the administration and client utilities.
Port Name: The name of the printer port. Each printer port has to be assigned a name. The printserver driver uses this name to access the printer port. 8.4.1.1 Advanced Settings You can enable/disable the printing protocols from the screen. To enable the function, please select “Enabled”; to disable the function, please select “Disabled”. 8.4.
network by Ethernet cable when starting up, the print server will run in Ethernet mode. If the print server is not connected to an active network by Ethernet cable when starting up, the print server will run in wireless LAN mode. The print server default is in “Disable” mode. Mode is the operation mode of wireless station. You can choose ether “Ad Hoc” or “Infrastructure” mode. If you do not have any access point and want to use peer-to-peer connection, you have to choose “Ad Hoc” mode.
8.4.2.2 Encryption This print server supports WEP and WPA-PSK security mode. If you want to use WEP encryption to protect your wireless network, you have to select “WEP”. If you want to use WPA-PSK, you have to select “WPA-shared key”. The wireless security setting should be the same with other wireless devices in the same network.
Key Format - You may select to use ASCII Characters (alphanumeric format) or Hexadecimal digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. Key Length - You can choose “64-bit” to use WEP with 64-bit key length encryption or choose “128-bit” to use WEP with 128-bit key length encryption. The longer key length can provide better security but worse transmission throughput.
WPA Key – Enter 8 to 63 digits of ASCII format to be the key for the authentication within the network. When you finish configuring the wireless security, click “Save & Next” to confirm the configuration. 8.4.2.3 Site Survey You can use this “Site Survey” function to search for available access points in you location. In the list is the information of all available access points or wireless stations, includes SSID, BSSID, Channel, Type, Encryption and Signal Strength.
8.4.3 TCP/IP You can configure the print server to automatically obtain an IP addddress from your LAN DHCP server or manually specify a static IP address. If you need the print server to automatically get an IP from DHCP server, select “Enable Obtain TCP/IP settings automatically”. Or you can select “Disable Use the following TCP/IP settings” to manually assign IP Address, Subnet Mask and Gateway for the print server. 8.4.4 SMB You may Enable/Disable the SMB Printing protocl of this print server.
8.4.5 SNMP This printserver has support SNMP protocol for users use SNMP management tool to monitor from a remote site. You can Enable this protocol and set the SNMP System Contact and SNMP System Location in this page. SNMP System Contact: Text Field - Name of the contact person. SNMP System Location: Text Field - Location of the contact person. 8.4.6 NetWare This print server supports NetWare Bindery Printing method.
name, print server polling interval and the name of queue on the NetWare server for each printer port. Polling Time: The polling interval of the print server for waiting printing jobs on the NetWare server. Name of the File Server: Name of the NetWare file server that provides printer queues. 8.4.7 AppleTalk AppleTalk is a data communication protocol often used by Macintoshes. The print server can use these parameters to join the AppleTalk network and share the printer to other AppleTalk workstations.
8.5 System Tools 8.5.1 Load Default You can restore print server to factory default settings in this screen. All of your previous configuration will be cleared. 8.5.2 Upgrade Firmware You can upgrade new firmware for this print server in this screen. Click “Browse...” button to locate the new firmware and then click “OK”, the firmware will be updated in several minutes.
Chapter9 IPP Printing 9.1 Introduction IPP (Internet Printing Protocol) Printing provides a convenient way of remote printing service by TCP/IP. The print server can support IPP printing by default. It is needless to do any setting. Any PC that can support IPP printing, for example Windows 2000/XP, can directly uses the print server by IP. By using the IPP printing, you can share the printer to all the PC’s that can access the print server by IP. You can even share your printer to Internet users. 9.2 9.
“http://192.168.12.13/lpt1:631”. After entering the URL of print server, click “Next >” and complete the configurations afterwards to access the shared printer.
A p p e n d i x A Sp e c i f i c a t i o n Model FPS-1010G Wired Interface Media Interface 1-port RJ-45 UTP Standards IEEE802.3, 10Base-T; IEEE802.3u, 100Base-TX Cabling Category 5/5e or above, 2-pair Wireless Interface Frequency 2.4 to 2.4835 GHz (ISM Band) Standards IEEE802.11b; IEEE802.11g Encryption WPA-PSK, 64 bits & 128 bits WEP Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps Output Power 18dBm General Printer Ports 1 * USB2.
