User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
8
1. INTRODUCTION
PLANET 8/16/24-port 10/100Mbps 802.3at PoE + 2-port Gigabit TP/SFP Combo Managed PoE+ Switch Series,
FGSD-1008HPS, FGSW-1816HPS, FGSW-2624HPS and FGSW-2624HPS4, comes with the multi-port Fast Ethernet Switch
and SFP fiber optic connectibility and robust Layer 2 features. The descriptions of this series are shown below:
FGSD-1008HPS 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switch (120W)
FGSW-1816HPS 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switch (240W)
FGSW-2624HPS
24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switch (240W)
FGSW-2624HPS4
24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switch (370W)
“Managed PoE+ Switch” is used as an alternative name in this user’s manual.
1.1 Packet Contents
Open the box of the Managed PoE+ Switch and carefully unpack it. The box should contain the following items:
Check the contents of your package for the following parts:
The Managed PoE+ Switch x 1
Quick Installation Guide x 1
RS232 to RJ45 Console Cable x 1
Rubber Feet x 4
Rack Mount Accessory Kit x 1
Power Cord
SFP Dust-proof Caps
x 1
x 2
If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the
original packing material, and use them again to repack the product in case there is a need to return it to us for repair.