User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
77
• Period for (Giga/100/10)
Set reception period and the available options are shown below:
200us/2ms/20ms
1ms/10ms/100ms
10ms/10ms/10ms
100ms/100ms/100ms
Storm Control State
• Port Selection
Select specific port for further configuration.
• Broadcast
Enable or disable the broadcast storm control function.
• Multicast
Enable or disable the multicast storm control function.
• DLF
Enable or disable the unknown destination MAC packets control function.
• ARP
Enable or disable the ARP packets control function.
• ICMP
Enable or disable the ICMP packets control function.
• Port No.
Display per port list.
• Broadcast
Display per port broadcast storm control setting.
• Multicast
Display per port multicast storm control setting.
• DLF
Display per port unknown destination MAC packets control setting.
• ARP
Display per port ARP packets control setting.
• ICMP
Display per port ICMP packets control setting.
Button
: press this button to take effect.