User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
75
The page includes the following fields:
Object Description
• Source Port Selection
Select specific port for monitoring incoming and outgoing flow from the port.
• Destination Port Selection Select the specific port for copy flow data from source ports and then
forward to message analyzer to analyze message, and finally analysis of
message forward to destination port.
• State
Enable or disable the port mirroring function.
• Method
Select method for monitoring of incoming, outgoing or both methods, and
the available options are shown below:
Egress/Ingress/Both.
Button
: press this button to take effect.