User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
65
4.3.1 PoE Port Settings
This page provides configuration for all PoE ports as the PoE Port settings screen in Figure 4-3-3 appears.
Figure 4-3-3: PoE Port Settings Configuration Page Screenshot
The page includes the following fields:
Object
Description
• Total Available Power Display Managed PoE+ Switch PoE Budget.
• Total Consumption Display Managed PoE+ Switch current PoE power used in watts..
•
Port Selection
Select specific PoE port for further configuration.
• State Enable or disable specific PoE port power feeding function.
•
Mode
Choose AT or AF PoE operation mode.
• Budget (Watt) Input the PoE power output value and the available options are 1 to 30 watts.
•
Extended
Enable or disable PoE extend mode
Port
Display per PoE port list.
Settings
• State Display per PoE port operation status.
•
Budget (Watt)
Display per PoE port budget setting.
• AT/AF Display per PoE port AT/AF setting.
• Extended Display per PoE port extend mode status
Status
•
Class
Display per PoE port current PoE class value detection.
• Consumption (Watt) Display per PoE port current PoE power usage information in watts.