User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
60
4.2.6 Syslog Settings
The Syslog settings provide to set system log settings, the configured column is used to select the related settings of Syslog
settings as the screen in Figure 4-2-13 appears.
Figure 4-2-13: Syslog Settings Configuration Page Screenshot
The page includes the following fields:
Object Description
• Syslog State
Enable or disable the Syslog function.
• Name
Display the available protocol for facility setting on this page.
• State
Click to enable the available protocol for facility setting on this page.
• Facility
Selelct the local device number and the range is 0 to 7.
• IP
Input the IP address of remote server
• Port
The port number of remote server.
• Priority
Log priority range 0 to 7.
Button
: press this button to take effect.