User's Manual

User’s Manual of FGSW-Series
20
Product FGSW-1816HPS FGSW-2624HPS FGSW-2624HPS4
Hardware Specifications
Copper Ports
16 10/100BASE-TX RJ45
Auto-MDI/MDI-X ports
24 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
PoE Injector Port
16 802.3af/802.3at PoE+
injector ports
24 802.3af/802.3at PoE+ injector ports
Gigabit Copper Ports 2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000BASE-X SFP interfaces, shared with Gigabit copper ports
Console
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
Reset Button
> 5 sec: Factory default
< 5 sec: System reboot
Thermal Fan
2
Power Requirements
100~240V AC, 50/60Hz,
3.6A (max.)
100~240V AC, 50/60Hz,
3.6A (max.)
100~240V AC, 50/60Hz,
6.5A (max.)
Power
Consumption/Dissipation
Max.270watts/921BTU Max.281watts/959BTU Max.413watts/1409BTU
Dimensions (W x D x H)
440 x 208 x 44 mm, 1U height
Weight
2332g 2787g
Enclosure
Metal
Metal
LED
System:
Power (Green)
SYS (Green)
10/100TX RJ45 Interfaces:
LNK/ACT (Green), PoE-in-Use (Amber)
10/100/1000BASE-T RJ45 / SFP Interfaces:
LNK/ACT10/100 (Amber), 1000 (Green)
Switching
Switch Architecture Store-and-Forward
Switch Fabric
7.2Gbps/non-blocking
8.8Gbps/non-blocking
Switch Throughput@64bytes
5.35Mpps @64bytes
6.55Mpps @64bytes
MAC Address Table
16K entries
Shared Data Buffer
4Mb
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame
16K bytes
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Output
Per Port 54V DC, 300mA.
Max. 15.4 watts (IEEE
802.3af)
Per Port 54V DC, 600mA.
Max. 30 watts (IEEE
802.3at)
Per Port 53 DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 53 DC, 600mA. Max. 30 watts (IEEE 802.3at)
PoE Power Supply Type
End-span Mid-span
Power Pin Assignment
1/2(+), 3/6 (-)
4/5(+), 7/8 (-)
PoE Power Budget
240 watts
240 watts
370 watts
Number of PDs, 7 watts
16 24 24
Number of PDs, 15.4 watts
15 15 24
Number of PDs, 30 watts
8
8
12