User's Manual

User’s Manual of FGSW-Series
165
4.9.6 Loop Detect
Configure Loop Detect on this page. Loop Detect is used to detects the loop connection generated on Managed PoE+ Switch,
once detect the loop connection will block port to prevent loop connection affect Managed PoE+ Switch operation performance.
The Loop Detect Configuration screen in Figure 4-9-26 appears.
Figure 4-9-26: Loop Detect Settings Configuration Page Screenshot
The page includes the following fields:
Object Description
Loop Detect Setting
• Loop Detection State This column provides configuring enable or disable the Loop Detection State
function.
• LDP Interval Time This column provides configuring LDP Interval Time settings, the default value
is 3
and the available range is
1
to
255
. Unit is 500ms.
• Block Release Time This column provides configuring Block Release Time settings, the default
value is 9 and the available range is 1 to 255. Unit is 500ms.
• LDP MAC Destination
Address
This column provides configuring LDP MAC Destination Address settings.
Loop Detect Port Setting
• Loop Detect Port
Enabled
This column provides configuring to select specific port for Loop Detect Port
Enabled settings.