User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
141
4.9.1.1 STP Global Settings
This page allows you to configure the STP Global settings for Managed PoE+ Switch as the screen in Figure 4-9-5 appears.
Figure 4-9-5: STP Global Settings Configuration Page Screenshot
The page includes the following fields:
Object Description
• STP State This column provides configuring enable or disable the spanning tree function.
• STP Version This column provides selecting the spanning tree operation version; the default
version is MSTP and available options are STP, RSTP and MSTP.
• Bridge Max Age (6-40) This column provides configuring the value for Bridge Max Age; the default
value is 20 seconds and the available range is 6 to 40 seconds.
• Bridge Hello Time (1-10) This column provides configuring the value for Bridge Hello Time; the default
value is 2 seconds and the available range is 1 to 10 seconds.
• Bridge Forward Delay
(4-30)
This column provides configuring the value for Bridge Forward Delay; the
default value is 15 seconds and the available range is 4 to 30 seconds.
• Max Hops (6-40) This column provides configuring the value for Max Hops; the default value is
20 seconds and the available range is 6 to 40 seconds.
• TC Counters (5-30) This column provides configuring the value for TC Counters; the default value is
5 and the available range is 5 to 30.
• STP BPDU Filter This column provides configuring enable or disable the spanning BPDU Filter
function.
Button
: press this button to take effect.