User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
131
The page includes the following fields:
Object Description
MAC Table Binding
• Port Selection Select specific port for MAC Address Binding settings.
• Binding Enable Click to enable the MAC Binding function.
• Aging Time This column provides configuring the Aging time for MAC address table refresh; the
default aging time is 300 seconds and available range is 1 to 1800000 seconds.
MAC Entry Creation
• MAC
This column provides configuring the MAC address for specific port.
• Port This column provides selecting the port for this MAC address.
MAC Entry Management
• MAC
Display the MAC information.
• Port
Select specific port for MAC Address Binding settings.
• Priority
Select specific priority for MAC Address Binding settings; the default is Disable and
available options are from
0 to 7
.
• Drop
Click to enable the Drop function.
• Sniffer
Click to enable the Sniffer function.
• Sflow
Click to enable the Sflow function.
MAC Table Monitor
• Entry Number
Display the MAC Address Binding entry number information.
• MAC
Display the MAC information.
State
Display the MAC Address state information.
Port
Display the Port information.
Drop
Display the Drop status information.
Sniffer
Display the Sniffer status information.
Sflow
Display the Sflow status information.
Priority
Display the Priority status information.
• Action
: press this button to edit specific MAC Address Binding setting.
: press this button to delete MAC Address Binding setting.