User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
112
4.7.2.2 IP
The Access Control List configuration includes the function that is based on IP address as the screen in Figure 4-7-4 appears.
Figure 4-7-4: ACL Profile List-IP Configuration Page Screenshot
The page includes the following fields:
Object Description
• Name
Display the ACL profile name.
• Source IP Address
Configure the Source IP Address.
• Source IP Mask
Configure the Source IP Mask and the available options are shown below:
255:255:255:255
255:255:255:240
255:255:255:0
255:255:240:0
255.255:0:0
255.0.0.0
240.0.0.0
• Source Port Range
Configure the Source Port Range of Low and High.
• Destination Port Range
Configure the Destination Port Range of Low and High.
• Ingress Port
Select the specific port as Ingress port.
• Action
Select the action and the available options are shown below:
Drop
Type 1
Type 2
Button
: press this button to take effect.