User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
107
4.6.9 TCP/UDP Port-based QoS
This page allows you to configure the TCP/UDP Port-based QoS settings for Managed PoE+ Switch as the TCP/UDP
Port-based QoS screen in Figure 4-6-9 appears.
Figure 4-6-9: TCP/UDP Port-based QoS Configuration Page Screenshot
The page includes the following fields:
Object Description
• TCP/UDP Port-based
Priority
Provides Q0 to Q7 and Drop options for the following protocols.
FTP/SSH/TELNET/SMTP/DNS/BOOTP/DHCP/TFTP/HTTP_0.1/POP3/NEWS/
SNTP/NETBIOS_0.1.2/IMAP_0.1/SNMP_0.1/HTTPS/User Defined A/ User
Defined B/ User Defined C/ User Defined D.
• User Defined TCP/UDP
Port Number
Provides four functions for setting.
User Defined A (Port #)
User Defined B (Port #)
User Defined C (From Port# To Port#)
User Defined D (From Port# To Port#)
Button
: press this button to take effect.