User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
10
Built-in Unique PoE Functions for Surveillance Management
As the managed PoE+ Switch for surveillance network, it features the following intelligent PoE management functions:
PD Alive Check
PoE Port Sequence
PoE Schedule
Intelligent Powered Device Alive Check
The Managed PoE+ Switch can be configured to monitor a connected PD status in real time via ping action. Once the PD stops
working and it is without response, the Managed PoE+ Switch will resume the PoE port power and bring the PD back to work. It
will greatly enhance the network reliability through the PoE port resetting the PD’s power source, thus reducing administrator
management burden.
PoE Schedule for Energy Saving
Besides being used for IP surveillance, the Managed PoE+ Switch is certainly applicable to build any PoE network including
VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the
Earth, the Managed PoE+ Switch can effectively control the power supply besides its capability of giving high watts power. The
“PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals
and it is a powerful function to help SMBs and enterprises save energy and budget.