User's Manual

21
2.3.1 Switch Mode
There are three modes -- “Standard”, “VLAN” and “Extend” – for selection.
Model FGSD-1022VHP FGSW-1822VHP FGSW-2622VHP
Switch
Mode
Function
Standard
(default)
This mode makes the 802.3at PoE+ Switch operate as a general
switch and all PoE ports operate at 10/100Mbps auto-negotiation.
VLAN
This mode makes
the FGSD-1022VHP
operate as a VLAN
isolation switch and
1. Port 1 to port 8 will
isolate respectively.
2. Port 1 to port 8 can
only communicate
with port 9~12
(uplink port).
This mode makes
the FGSW-1822VHP
operate as a VLAN
isolation switch and
1. Port 1 to port 16 will
isolate respectively.
2. Port 1 to port 16 can
only communicate
with port 17~20
(uplink port).
This mode makes
the FGSW-2622VHP
operate as a VLAN
isolation switch and
1. Port 1 to port 24 will
isolate respectively.
2. Port 1 to port 24 can
only communicate
with port 25~28
(uplink port).
Extend
with
VLAN
Isolation
This mode makes
the FGSD-1022VHP
operate as a VLAN
isolation switch and
1. Port 1 to port 8 will
isolate respectively.
2. Port 1 to port 8 can
only communicate
with port 9~12
(uplink port).
3. 20-watt PoE transmit
distance of 250m at
speed of 10Mbps.
This mode makes
the FGSW-1822VHP
operate as a VLAN
isolation switch and
1. Port 1 to port 16 will
isolate respectively.
2. Port 1 to port 16 can
only communicate
with port 17~20
(uplink port).
3. 20-watt PoE transmit
distance of 250m at
speed of 10Mbps.
This mode makes
the FGSW-2622VHP
operate as a VLAN
isolation switch and
1. Port 1 to port 24 will
isolate respectively.
2. Port 1 to port 24 can
only communicate
with port 25~28
(uplink port).
3. 20-watt PoE transmit
distance of 250m at
speed of 10Mbps.
Table 2-1: FGSD/FGSW 802.3at PoE+ Switch Description