User's Manual

2.2 Rear Panel

The rear panel of the 802.3at PoE+ Switch has an AC power socket (100-240V AC,

50/60Hz, 2.5/5A max.).

50/60Hz

100-240V , 2.5A max.

Figure 2-4: FGSD-1022VHP Switch Rear Panel

100-240V , 50/60Hz, 5A max.

Figure 2-5: FGSW-1822VHP/FGSW-2622VHP Switch Rear Panel

 AC Power Receptacle

For compatibility with electrical outlet standard in most areas of the world, the

802.3at PoE+ Switch’s power supply automatically adjusts to line power in the

range of 100-240V AC, 50/60Hz, 2.5/5A max.

Plug the female end of the power cord rmly into the receptacle on the rear panel

of the 802.3at PoE+ Switch and the other end into an electrical outlet, and the

power will be ready.

Power

Notice

The device is a power-required device, which means it will not

work till it is powered. If your networks should be active all the

time, please consider using UPS (Uninterrupted Power Supply) for

your device. It will prevent you from network data loss or network

downtime. In some areas, installing a surge suppression device

may also help to protect your 802.3at PoE+ Switch from being

damaged by unregulated surge or current to the Switch or the

power adapter.