24-Port 10/100Mbps with 2-Gigabit Web Smart PoE Switch User's Manual

- 5 -
1.3 Features
◆ Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard
◆ 24-Port 10/100Mbps Fast Ethernet Switch
◆ 2-Port Gigabit TP/SFP combo ports
◆ 12-Port PoE( FGSW-2612PVS) and 24-Port PoE( FGSW-2620PVS)
◆ Each Switching ports support auto-negotiation-10/20, 100/200Mbps supported
◆ Supports IEEE 802.3af 15.4 watts power output on each port
◆ Auto-MDI/MDI-X detection on each RJ-45 port
◆ Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex)
◆ High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous
packets to optimize the network bandwidth
◆ 8K MAC address table, automatic source address learning and ageing
◆ 512K Bytes packet buffers
◆ Web interface for Switch basic management and setup
◆ Support up to 26 port-based VLAN groups
◆ Support up to 7 Trunk groups, each trunk for up to maximum 8 port with 800Mbps bandwidth
◆ Port mirroring allows monitoring of the traffic across any port in real time
◆ Support QoS and bandwidth control on each port
◆ Supports Access Control List function
◆ 19-inch rack mount size
◆ Internal full-range power supply suitable for worldwide use
◆ EMI standards comply with FCC, CE class A
1.4 Specification
Product FGSW-2620PVS FGSW-2612PVS
Hardware Specification
Ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
Module Slots 2 Gigabit TP/SFP combo ports
PoE ports
24( port 1 to port 24)
12( port 1 to port 12)
Switch Processing Scheme Store-and-forward
Throughput (packet per second) 6.547Mpps
Switch fabric 8.8Gbps
Address Table 8K entries
Share data Buffer 512K Bytes
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions 440 x 265 x 44 mm, 1U height
Weight 3.87kg 3.51kg
Power Requirement 100~240V AC, 50-60 Hz
Power Consumption /
Dissipation
13.5 Watts maximum / 46 BTU/hr maximum