(V2) Datasheet

ManualsBrandsPLANET Technology ManualsFast Ethernet PoE Switch24-Port 10/100BASE-TX 802.3at PoE + 1-Port Gigabit TP/SFP Combo Ethernet Switch

FGSW-2511P

Centralized Power Distribution for HD IP Surveillance System

The FGSW-2511P, a new PLANET 802.3at PoE Fast Ethernet Switch, provides

24 10/100BASE-TX 802.3at PoE+ ports with a total of 190 watts of PoE budget,

one 10/100/1000BASE-T uplink port, and one shared 1000BASE-X SFP slot. Its

PoE power is more than enough for those network applications with Fast Ethernet

speed transmission.

Distance Extended for Transmission of Power and Data

The built-in solid DIP switch provides "Standard", "VLAN", “QoS” and "Extend"

operation modes.

■ In the "Standard" operation mode, the FGSW-2511P operates as a normal

IEEE 802.3at PoE+ Switch.

The 24 802.3at PoE+ ports feature PoE power injector function which is able to

drive 24 IEEE 802.3at compliant powered devices. The FGSW-2511P also offers

a simple, cost-effective and non-blocking wire-speed performance. It comes with

a 19-inch metal housing, suitable for desktop deployment in SOHO office or

department network application.

24-Port 10/100BASE-TX 802.3at PoE + 1-Port Gigabit TP/SFP

Combo Ethernet Switch

Physical Interface

• 24 10/100BASE-TX RJ45 copper ports

• One 10/100/1000BASE-T Gigabit RJ45 copper port

• One shared 1000BASE-X SFP interface

• Hardware-based DIP switch for “Standard”, “VLAN”, “QoS”

or “Extend” mode selection

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus

end-span PSE

• Up to 24 IEEE 802.3af/at devices powered

• Supports PoE power up to 30 watts for each PoE port

• 190-watt PoE budget

• Each PoE port supports 52V DC power to PoE powered

device

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100m in standard mode

• The “Extend” mode features 25-watt PoE transmit distance

of 250m at speed of 10Mbps

Switching

• Hardware-based 10/100Mbps and 10/100/1000Mbps auto-

negotiation and auto MDI/MDI-X

• Flow control for full duplex operation and back pressure for

half duplex operation

• Integrates address look-up engine, supporting 16K absolute

MAC addresses

• Automatic address learning and address aging

• Solid DIP switch to isolate ports to prevent broadcast storm

and defend DHCP spoong

Hardware

• 19-inch rack-mount size, 1U height

• LED indicators for PoE ready/activity and LINK/ACT

• Internal AC power supply

• Supports Energy-E󰀩cient Ethernet (EEE) function (IEEE

802.3az)

24 x 10/100BASE-TX 802.3at PoE+ Ports

Standard/VLAN/QoS/Extend

Mode Selection

LED Indicators

1 x Gigabit TP + 1 x Gigabit SFP

Combo Interface

Summary of content (6 pages)

PAGE 1
FGSW-2511P 24-Port 10/100BASE-TX 802.3at PoE + 1-Port Gigabit TP/SFP Combo Ethernet Switch Physical Interface • 24 10/100BASE-TX RJ45 copper ports • One 10/100/1000BASE-T Gigabit RJ45 copper port • One shared 1000BASE-X SFP interface • Hardware-based DIP switch for “Standard”, “VLAN”, “QoS” or “Extend” mode selection Centralized Power Distribution for HD IP Surveillance System The FGSW-2511P, a new PLANET 802.3at PoE Fast Ethernet Switch, provides 24 10/100BASE-TX 802.
PAGE 2
FGSW-2511P Standard Mode (default) Extend VLAN PoE IP Camera Standard QoS PoE Power FGSW-2511P 100 meters (328 feet) 100BASE-TX UTP with PoE PoE ■ The "VLAN" operation mode features port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.
PAGE 3
FGSW-2511P With this brand-new feature, the FGSW-2511P provides an additional solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “VLAN” operation mode.
PAGE 4
FGSW-2511P Applications Perfectly Integrated Solution for IP PoE Camera and NVR System Particularly designed for the growing popular IP Surveillance applications, the FGSW-2511P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The FGSW-2511P provides both 802.3at and 802.3af PoE functions along with 24 10/100BASE-TX ports featuring 30-watt 802.3at or 15.4-watt 802.
PAGE 5
FGSW-2511P Specifications Model FGSW-2511P Hardware Specifications 10/100Mbps Ports 24 10/100BASE-TX MDI/MDI-X RJ45 ports Gigabit Ports 1 10/100/1000BASE-T MDI/MDI-X RJ45 port SFP Slot 1 1000BASE-X SFP interface, shared with Gigabit RJ45 copper PoE Inject Port 24-port with 802.
PAGE 6
FGSW-2511P Related Products FGSW-2624HPS 24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switch FGSW-2624HPS4 24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Web Smart Ethernet Switch FGSW-2622VHP 24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port SFP Ethernet Switch with LCD PoE Monitor FGSW-1822VHP 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port SFP Ethernet Switch with LCD PoE Monitor GSW-2620VHP 24-Port 10/100/1000T 802.