User's Manual

3.2 Desktop Installation

To install the FGSW-2511P on desktop, simply follow the following steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the FGSW-

2511P, as shown in Figure 3-3.

1 3 5 7 9 11 13 17 19 2115 23 25

GigabitPWR

2 4 6 8 10 12 14 18 20 2216 24

PoE

FGSW-2511P

Standard

QoS

Extend

VLAN

24-Port 10/100X

802.3a

t PoE

1-Port Gigabit TP/SFP Combo Ethernet Switch

1 3 5 7 9 11 13 17 19 2115 23

2 4 6 8 10 12 14 18 20 2216 24

10/100/1000T

1000X

ACTLNK

PoE-in-Use

Figure 3-3: Attaching the Rubber Feet to the FGSW-2511P

Step 2: Place the FGSW-2511P on desktop near an AC power source.

Step 3: Keep enough ventilation space between the FGSW-2511P and the

surrounding objects.

Note

When choosing a location, please keep in mind the environmental

restrictions discussed in Chapter 1, Section 4, under Specifications.

Step 4: Proceed with Steps 6 and 7 of session 3.1 Rack-mount Installation to

connect the network cabling and supply power to your PoE+ Switch.

3.3 Grounding the Device

Uses MUST complete grounding wired with the device; otherwise, a sudden

lightning could cause fatal damage to the device. EMD (Lightning) DAMAGE IS NOT

CONVERED UNDER WARRANTY.