User's Manual

12
2.1.2 LED Indicators
System
LED Color Function
PWR Green Lights to indicate that the PoE+ Switch has power.
Per 10/100BASE-TX PoE+ Port
LED Color Function
LNK/ACT Green
Lights to indicate the PoE+ Switch is successfully
connecting to the network at 10/100Mbps.
Blinks to indicate that the Switch is actively sending or
receiving data over that port.
PoE-in-use Amber
Lights to indicate the port is providing 52V DC in-line
power. (1-24 ports)
10/100/1000BASE-T and 1000BASE-X combo Port
LED Color Function
LNK/ACT Green
Lights to indicate the Switch is successfully connecting to
the network.
Blinks to indicate that the Switch is actively sending or
receiving data over that port.
2.2 Rear Panel
The rear panel of the FGSD-1011HP has an AC inlet power socket, which accepts
input power of 100 to 240V AC, 50-60Hz.
100-240V , 3A max.
Figure 2-2: FGSW-2511P Switch Rear Panel
Power
Note
1. The device is a power-required device which means it will not
work till it is powered. If your networks should be active all the
time, please consider using UPS (Uninterrupted Power Supply)
for your device. It will prevent you from network data loss or
network downtime.
2. In some areas, installing a surge suppression device may also
help to protect your FGSW-2511P from being damaged by
unregulated surge or current to the FGSW-2511P.