User's Manual

2.1.1 Multiple Functions of DIP Switch

The front panel of FGSW-2511P provides one DIP switch for Standard, QoS,

VLAN and Extend mode se-lections. The detailed descriptions are shown in the

following table.

DIP Switch Mode Function

Standard

QoS

Extend

VLAN

This mode makes the FGSW-2511P operate as a general

switch and all PoE ports operate at 10/100Mbps auto-

negotiation. All ports can communicate with one another.

Standard

QoS

Extend

VLAN

This mode makes the FGSW-2511P operate as a VLAN

isolation switch and

1. Port 1 to port 24 will isolate respectively.

2. Port 1 to port 24 can only communicate with port 25

(uplink port)

Standard

QoS

Extend

VLAN

1. Port 1 to Port 8 supports port priority; optimize port

cache

2. All ports can communicate with one another.

Standard

QoS

Extend

VLAN

This mode makes the FGSW-2511P operate as a Long

Reach PoE switch and

1. Port 1 to Port 8 support farthest transmission distance

of up to 250 meters

2. Port 1 to Port 8 data rate down to 10Mbps

3. All ports can communicate with one another

Note

Please adjust the DIP switch before powering on the FGSW-2511P.