User Manual

3.1 Rack Mounting

To install the FGSW-2511P in a 19-inch standard rack, follow the instructions

described below.

Step 1: Place your FGSW-2511P on a hard at surface, with the front panel

positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the FGSW-2511P with

supplied screws attached to the package. Figure 3-1 shows how to attach

brackets to one side of the FGSW-2511P.

1 3 5 7 9 11 13 17 19 2115 23 25

GigabitPWR

2 4 6 8 10 12 14 18 20 2216 24

PoE

FGSW-2511P

Standard

QoS

Extend

VLAN

24-Port 10/100X

802.3a

t PoE

1-Port Gigabit TP/SFP Combo Ethernet Switch

1 3 5 7 9 11 13 17 19 2115 23

2 4 6 8 10 12 14 18 20 2216 24

10/100/1000T

1000X

ACTLNK

PoE-in-Use

Figure 3-1: Attaching the Brackets to the FGSW-2511P.

You must use the screws supplied with the mounting brackets.

Damage caused to the parts by using incorrect screws would invali-

date the warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the opposite side.