Datasheet

3
FGSW-1822VHP
In the Extend operation mode, the FGSW-1822VHP operates on a per-port basis at 10Mbps duplex operation but can support 20-watt PoE power output
over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSW-1822VHP provides an
additional solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to
prevent broadcast storm and defend DHCP spoong in the Extend operation mode.
Standard Mode (default)
Power
PoE
100 meters (328 feet)
FGSW-1822VHP
PoE
100BASE-TX UTP with PoE
PoE IP Camera
> Standard
VLAN
Extend
Extend Mode
Power
250 meters (820 feet)
PoE
FGSW-1822VHP
PoE
10BASE-T UTP with PoE
PoE IP Camera
Standard
VLAN
> Extend
Flexible Extension Solution
The two mini-GBIC slots built in the FGSW-1822VHP is compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) ber transceiver, uplinked
to the backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 10/20/30/40/50/60/70/120 kilometers
(single-mode ber or WDM ber). They are well suited for applications within the enterprise data centers and distributions.
Robust Protection
The FGSW-1822VHP provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±6KV surge
immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the ow of operation does not uctuate.
Easy Installation and Cable Connection
As data and power are transmitted over one cable, the FGSW-1822VHP does not need a second cable and electrical outlets on the wall, ceiling or any
unreachable place. Thus, it helps to lower the installation costs and simplify the installation effort. All the RJ45 copper interfaces of the FGSW-1822VHP
support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X
that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.