Datasheet

ManualsBrandsPLANET Technology ManualsFast Ethernet PoE Switch16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port SFP Ethernet Switch with LCD PoE Monitor

FGSW-1822VHP

Simple “Plug and Watch” for a Quick Solution

PLANET FGSW-1822VHP is an ideal Plug and Watch Power over Ethernet

solution which provides quick installation, real-time PoE work status monitoring

and immediate troubleshooting through its unique LCD display to improve work

efciency and quality without any PC or software required.

The FGSW-1822VHP is equipped with 16 10/100BASE-TX ports with each

port taking up 30 watts of PoE+ power and 2 Gigabit TP and 2 Gigabit SFP

interfaces with inner power system. With a total PoE+ power budget of 300 watts

and non-blocking data switching performance, the FGSW-1822VHP can fulfill the

demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized,

reliable and visible power solution for small businesses and system integrators

deploying Power over Ethernet networks.

16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port

SFP Ethernet Switch with LCD PoE Monitor

Physical Port

• 16 10/100BASE-TX Fast Ethernet RJ45 copper ports

• 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC

SFP interfaces

Power over Ethernet

• Complies with IEEE 802.3af/at Power over Ethernet end-

span PSE

• Up to 16 ports of IEEE 802.3af/at devices powered

• Supports PoE Power up to 32 watts for each PoE port

• Each port supports 54V DC power to PoE powered device

• 300-watt PoE budget

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100m in standard mode and

250m in extend mode

Smart LCD

• The LCD switch features Standard, VLAN and

Extend modes; the Extend mode features 20-watt PoE

transmission distance of 250m at speed of 10Mbps and

VLAN isolation

• The LCD switch is able to isolate ports to prevent

broadcast storm and defend DHCP spoong

• Power low-voltage, power over-voltage and PSE over-

temperature protection

• Screen saver, fan control, factory default and save

conguration

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PD alive check

Switching

• Hardware-based 10/100/1000Mbps auto-negotiation and

auto MDI/MDI-X

• Flow control for full duplex operation and back pressure for

half duplex operation

Smart LCD Power LED

Gigabit TP/SFP

LNK/ACT Status

PoE & LNK/ACT

Status

Menu/Enter/Back

Up/Down Button

2 x Gigabit TP/SFP

16 x 10/100BASE-TX 802.3at PoE+

Summary of content (7 pages)

PAGE 1
FGSW-1822VHP 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port SFP Ethernet Switch with LCD PoE Monitor Physical Port • 16 10/100BASE-TX Fast Ethernet RJ45 copper ports • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP interfaces Power over Ethernet • Complies with IEEE 802.3af/at Power over Ethernet endspan PSE Simple “Plug and Watch” for a Quick Solution • Up to 16 ports of IEEE 802.
PAGE 2
FGSW-1822VHP Smart and Intuitive LCD Control • 9216bytes packet size PLANET FGSW-1822VHP provides an intuitive color panel on its front panel that • Integrates address look-up engine, supporting 8K absolute facilitates the Ethernet management and PoE PD management. They greatly MAC addresses promote management efficiency in large-scale networks for enterprises, hotels, shopping malls, government buildings and other public areas, and feature the • IEEE 802.
PAGE 3
FGSW-1822VHP In the Extend operation mode, the FGSW-1822VHP operates on a per-port basis at 10Mbps duplex operation but can support 20-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSW-1822VHP provides an additional solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation.
PAGE 4
FGSW-1822VHP Applications Perfectly-integrated Solution for PoE IP Camera and NVR System To fulfill the needs of the high power consumption of PoE network applications, the FGSW-1822VHP provides 16 IEEE 802.3at Power over Ethernet Plus (PoE+) ports that combine up to 30 watts of power output and data per port over one Cat5E/6 Ethernet cable. With its 11.
PAGE 5
FGSW-1822VHP Specifications Model FGSW-1822VHP Hardware Specifications 802.3af/802.3at PoE Injector Port 16 10/100BASE-TX MDI/MDIX Ports 16 10/100/1000BASE-T MDI/MDIX Ports 2 1000BASE-X SFP/mini-GBIC Slots 2 Switch Architecture Store-and-Forward Switch Fabric 11.2Gbps/non-blocking Switch Throughput@64 bytes 8.3Mpps@64bytes MAC Address Table 8K entries Maximum Frame Size 9216 bytes Flow Control IEEE 802.
PAGE 6
FGSW-1822VHP Ordering Information FGSW-1822VHP 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port SFP Ethernet Switch with LCD PoE Monitor Related Products GSW-2620VHP 24-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Gigabit Ethernet Switch with LCD PoE Monitor (300W) FGSD-1022VHP 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Desktop Switch with LCD PoE Monitor (120W) FGSW-2622VHP 24-Port 10/100TX 802.
PAGE 7
FGSW-1822VHP Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP) Model DDM MGB-GT MGB-SX(V2) MGB-SX2(V2) MGB-LX(V2) MGB-L40 MGB-L80 MGB-L120(V2) MGB-TSX MGB-TSX2 MGB-TLX(V2) MGB-TL40 MGB-TL80 YES YES YES YES YES YES YES YES YES YES YES Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.