User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- 6. Power over Ethernet Overview
- 7. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of FGSW-1816HPS
84
4.10.4 Port Sequential
This page allows the user to configure the PoE Ports started up interval time. PoE delay is to delay power feeding when the
switch is completely booted up as Figure 4-10-4 shows.
Figure 4-10-4: PoE Port Sequential Configuration Screenshot
The PoE port will start providing power after the whole system program has finished running.
The page includes the following fields:
Object Description
Delay Mode
Allows user to enable or disable Sequential Power up function.
The default is Disable.
Delay Time (0 ~ 300)
seconds
Allows user to configure the PoE Port Start Up interval time.
Port No.
Select the ports to apply the Port Sequential function
The PoE Port Sequential Setting Status screen in Figure 4-10-5 appears.