User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- 6. Power over Ethernet Overview
- 7. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of FGSW-1816HPS
52
4.4.4 Multi to 1 Setting
This setting is exclusive to VLAN setting on ”VLAN member setting “. When VLAN member setting is updated, multi-to-1 setting
will be void and vice versa. The “disabled port” means the port is excluded in this setting. The function is for Port-based VLAN
only. All ports excluded in this setting are treated as the same VLAN group. Figure 4-4-7 shows the Multi to 1 Setting.
The VLAN Port Configuration screen in Figure 4-4-7 appears.
Figure 4-4-7: Multi to 1 Configuration Page Screenshot
The page includes the following fields:
Object Description
Destination Port No.
Configure port mapping destination rule
Current Setting
Display the current destination port
Disable Port
Disable multi to 1 setting function for selected port
Buttons
: Click to apply changes