User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- 6. Power over Ethernet Overview
- 7. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of FGSW-1816HPS
48
4.4.2 VLAN Basic Information
The VLAN Basic Information page displays basic information on the VLAN type supported by the PoE Web Smart Switch.
The VLAN Basic Information screen in Figure 4-4-1 appears.
Figure 4-4-1: VLAN Basic Information Page Screenshot
The page includes the following fields:
Object Description
VLAN Mode
Display the current VLAN mode used by this PoE Web Smart Switch.
Options:
Port-based
IEEE 802.1Q VLAN
4.4.2.1 Port-based VLAN mode
The default VLAN mode is “Port-based VLAN” from the VLAN mode. The screen in Figure 4-4-2 appears.
Figure 4-4-2 Port-based VLAN Mode Web Page Screen
4.4.2.2 Tag-based VLAN Mode
This section introduces detailed information of IEEE 802.1Q VLAN function of PoE Web Smart Ethernet Switch. To execute
“Tag-based VLAN” mode from VLAN mode, press “Change VLAN mode” button to enable the 802.1Q VLAN function. One
screen in Figure 4-4-3 will appear to ask for confirming the swap VLAN mode.