User Manual

User’s Manual of FGSW-1816HPS
42
The page includes the following fields:
Object Description
 Port No
Select port number for this drop-down list to enable the function.
 Tx Rate
Configure the Tx rate for the selected port.
Valid values are in the range from 0 to 255; 0 is unlimited rate.
 Rx Rate
Configure the Rx rate for the selected port.
Valid values are in the range from 0 to 255; 0 is unlimited rate.
 Speed Base
Configure the speed limitation mode. The possible field values are:
Low
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 32Kbps (Port
1~Port 18)
High
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 256Kbps (Port
1~Port 16)
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 2048Kbps (Port
17~Port 18).
Buttons
: Click to apply changes
: Click to restore default settings
Figure 4-3-5 Ingress Bandwidth Control Status Page Screenshot
The page includes the following fields:
Object Description
 Port No
The switch port number of the logical port.
 Tx Rate
Display the current Tx rate limitation.