User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- 6. Power over Ethernet Overview
- 7. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of FGSW-1816HPS
33
Press “Factory Default” button to take affect. After finish the operation, the following screen in Figure 4-2-5 appears and
please press “Reboot” button and it will back to the Web login screen. After input default username and password then can
continue the PoE Web Smart Ethernet Switch management.
Figure 4-2-5 Web Page Screen of Factory Default Finish
4.2.5 Firmware Update
This section provides firmware upgrade of the PoE Web Smart Ethernet Switch, the screen in Figure 4-2-6 appears. Before
Firmware Update, it will ask for the Password to confirm this procedure.
Figure 4-2-6 Firmware Update Web Page Screen
The page includes the following fields:
Object Description
Password
Enter the user’s password.
Re-Confirm
Re-enter the user’s password.
Buttons
: Click to apply changes