User Manual

User’s Manual of FGSW-1816HPS
20
Step6: Proceeds with the steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power
to the PoE Web Smart Switch.
2.2.3 Installing the SFP transceiver
The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port
without having to power down the PoE Web Smart Switch, as the Figure 2-5 shows.
Figure 2-5 Plug in the SFP transceiver
 Approved PLANET SFP Transceivers
PLANET PoE Web Smart Switch supports both Single mode and Multi-mode SFP transceiver. The following list of approved
PLANET SFP transceivers is correct at the time of publication:
Gigabit Ethernet Transceiver (1000Base-X SFP)
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm) Operating Temp.
MGB-GT 1000 Copper -- 100m --
0 ~ 60 ℃
MGB-SX 1000 LC Multi Mode 550m 850nm
0 ~ 60 ℃
MGB-SX2 1000 LC Multi Mode 2km 1310nm
0 ~ 60 ℃
MGB-LX 1000 LC Single Mode 10km 1310nm
0 ~ 60 ℃
MGB-L30 1000 LC Single Mode 30km 1310nm
0 ~ 60 ℃
MGB-L50 1000 LC Single Mode 50km 1550nm
0 ~ 60 ℃
MGB-L70 1000 LC Single Mode 70km 1550nm
0 ~ 60 ℃
MGB-L120 1000 LC Single Mode 120km 1550nm
0 ~ 60 ℃
MGB-TSX 1000 LC Multi Mode 550m 850nm
-40 ~ 75 ℃
MGB-TLX 1000 LC Single Mode 10km 1310nm
-40 ~ 75 ℃
MGB-TL30 1000 LC Single Mode 30km 1310nm
-40 ~ 75 ℃
MGB-TL70 1000 LC Single Mode 70km 1550nm
-40 ~ 75 ℃