Datasheet
FGSW-1816HPS
2
Intelligent LED Indicator for Real-time PoE Usage
The FGSW-1816HPS helps users to monitor the current status of PoE power usage
easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the
front panel of the FGSW-1816HPS Fast Ethernet PoE+ Switch has four orange LEDs
indicating 50W, 100W, 150W and 190W of PoE power usage.
PoE Schedule for Energy Saving
Besides being used as an IP Surveillance, the FGSW-1816HPS is certainly applicable
to constructing any PoE network including VoIP and wireless LAN. Under the trend
of energy saving worldwide and contributing to environmental protection on the Earth,
the FGSW-1816HPS can effectively control the power supply besides its capability of
giving high watts power. The “PoE schedule” function is for you to enable or disable
PoE power feeding for each PoE port during specied time intervals and it is a powerful
function to help SMBs or enterprises save power and money.
• Supports Spanning Tree Protocol
–
STP, IEEE 802.1d Spanning Tree Protocol
–
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
• Port mirroring to monitor the incoming or outgoing trafc
on a particular port
• Provides port mirror (Many-to-1)
• Loopback protection to avoid broadcast loops
Quality of Service
• 2 priority queues on all switch ports
• Trafc classication
–
Port-based priority
–
IEEE 802.1p-based priority
–
IP TOS / DSCP-based priority
–
TCP / UDP port-based QoS
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IGMP Snooping v1 and v2
Security
• Physical port to MAC address binding
• TCP/UDP port number lter: Forwarding or discarding
typical network applications
• Port mirroring to monitor the incoming or outgoing trafc
on a particular port
Management
• Switch Management Interfaces
–
Web switch management
–
SNMP v1 switch management
• Supports DHCP Option82 and DHCP Relay
• Firmware upload/download via HTTP
• Network Time Protocol (NTP)
• Hardware reset button for system reboot or reset to
factory default
• PLANET smart discovery utility
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
Total consumption of 36watts / hr
PoE
PoE PoE
PoE
5PM8AM
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
Saves 24watts / hr during off-business hours
PoE
PoE PoE
PoE
5PM 8AM
Total Saved = 10800watts / month
PoE
1000Base-T UTP with PoE
Robust Layer 2 Features
The FGSW-1816HPS can be programmed for advanced switch management functions
such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP
Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSW-1816HPS
provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN
groups allowed will be maximally up to 32. Via aggregation of supporting ports, the
FGSW-1816HPS allows the operation of a high-speed trunk combining multiple ports
and supports fail-over as well.
Flexible and Extendable Uplink Solution
The FGSW-1816HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting
10/100/1000Base-T RJ-45 copper to connect with surveillance network devices such
as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or
through these dual-speed ber SFP slots, it can also connect with the 1000Base-SX/LX
SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and
monitoring center in long distance. The distance can be extended from 550m to 2km
(multi-mode ber), even going up to above 10/20/30/40/50/70/120km (single-mode ber
or WDM fiber). They are well suited for applications within the enterprise data centers
and distributions.