Datasheet

2
FGSD-1011HP
Two Gigabit Uplink Ports
The FGSD-1011HP comes with two uplink ports with 1000Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for
connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential.
Fiber-Optic Link Capability Enables Extension of Network Deployment
The mini-GBIC slot built in the FGSD-1011HP supports SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small
Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver based on the transmission
distance or the transmission speed required to extend the network efficiently. The distance can be extended from 550 meters to 2 kilometers (multi-mode
fiber) and 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications to uplink to backbone switch and
monitoring center in long distance.
In the “Extend” operation mode, the FGSD-1011HP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over
a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSD-1011HP provides an additional
solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates each port so as to
prevent broadcast storm and defend DHCP spoong in the “Extend” operation mode.
Standard Mode (default)
Power
PoE IP Camera
PoE
100 meters (328 feet)
FGSD-1011HP
PoE
100BASE-TX UTP with PoE
Standard
VLAN
Extend
Extend Mode
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
FGSD-1011HP
PoE IP Camera
Standard
VLAN
Extend
LED Indicators
Standard/VLAN/Extend
Mode Selection
1 x Gigabit TP + 1 x Gigabit SFP
8 x 10/100BASE-TX 802.3at PoE+