User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
99
On the Access QoS configuration web page, you can view QoS management function informations of the Managed PoE+
Switch as the screen in Figure 4-6-1 appears.
Figure 4-6-1: Managed PoE+ Switch QoS Configuration Web Page
QoS Configuration
Item Description
QoS Group Member
Configure QoS Group Member configuration settings on this web page.
QoS Mode Set
Configure QoS Mode Set configuration settings on this web page.
QoS Out Queue Aging
Display and configure QoS Out Queue Aging settings on this web page.
QoS Remap
Display and configure QoS Remap settings on this web page.
Class of Service
Display and configure QoS Class of Service settings on this web page.
802.1p-based QoS
Display and configure 802.1p-based QoS settings on this web page.
DSCP-based Priority
Display and configure DSCP-based Priority settings on this web page.
TCP/UDP Port-based QoS
Display and configure TCP/UDP Port-based QoS settings on this web page.
Table 4-6-1: Descriptions of QoS Configuration