User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
89
• Port
Display per port list of Managed PoE+ Switch.
• Don’t care
As a VLAN member of specific VLAN group without any action.
• Add
As a VLAN member, add the Tag action to the packet sent out by this port.
• Remove
As a VLAN member, remove the Tag action to the packet sent out by this port.
• Forbidden
Configure that this port cannot register this Tag VLAN dynamically through GVRP.
• Not Member
Not a member of the VLAN.
Button
: press this button to take effect.
GVRP (GARP VLAN Registration Protocol) maintains VLAN dynamic registration information for GVRP
devices
based on the working mechanism of GARP to maintain VLAN dynamic registration information that
supports GVRP devices.
And propagate this information to other devices in order to achieve agreement on VLAN information for all
devices supporting GVRP in the same LAN.
The VLAN registration information propagated by GVRP includes both local manual static registration
information and dynamic registration information from other switches.