User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
88
• Priority
Display the Priority state of specific VLAN group.
• GVRP Forward
Display the GVRP Forward state of specific VLAN group.
• Action
: press this button to edit specific VLAN group.
: press this button to delete specific VLAN group.
Buttons
: press this button to create a new specific VLAN group.
: press this button to edit specific VLAN group.
: press this button to delete specific VLAN group.
Press the button to edit per member port state and the screen in Figure 4-5-5 appears.
Figure 4-5-5: Edit VLAN Tag-based Entry Config Configuration Page Screenshot
The page includes the following fields:
Object Description
• VLAN Name
Display and configure the name of specific VLAN group; the maximum length is 20
characters.
• VID
Display and configure the VLAN ID of specific VLAN group.
• Priority
Display and configure the Priority value of specific VLAN group.
• GVRP Forward
Display and configure the GVRP Forward mode