User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
70
Object Description
• Port Selection
Select specific PoE port for further configuration.
• Port
List all PoE Port for configure PoE schedule function.
• State: xxxxx change to
This column allows user to configure the PoE Port Start Up interval time.
Delay time range is from 1 seconds to 300 seconds.
• All
Select all optios on this page.
• Mon-Sun
Provide Mon/Tue/Wed/Thu/Fri/Sat/Sun options on this page.
• 00-23
Provide 24 hours options on this page.
Button
: press this button to take effect.
The Managed PoE+ Switch PoE schedule function needs to get NTP time.