User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
62
4.2.8 Configuration
The configuration includes backup and reload the current configuration of the Managed PoE+ Switch to/from the local
management station.
4.2.8.1 Backup
The backup configuration provides downloading the Managed PoE+ Switch configuration file (Current.tar.gz) to local
management station as the screen in Figure 4-2-15 appears.
Figure 4-2-15: Backup Configuration Page Screenshot
4.2.8.2 Restoration
The restore configuration provides upload the Managed PoE+ Switch configuration file (Current.tar.gz) to other Managed PoE+
Switch from local management station as the screen in Figure 4-2-16 appears.
Figure 4-2-16: Restoring Configuration Page Screenshot
The Managed PoE+ Switch configures restoration as the IP address setting is excluded.
Button
: press this button to take effect.