User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
58
4.2.4.6 SNMP Configuration
The SNMP Host Table provides to set SNMP settings; the configured column is used to input the selected operation modes of
SNMP State, SNMP Trap and SNMP Link Change Traps as the screen in Figure 4-2-11 appears.
Figure 4-2-11: SNMP Configuration Page Screenshot
The page includes the following fields:
Object Description
• SNMP State
Enable or Disable the Managed PoE+ Switch SNMP function on this page.
• SNMP Trap
Enable or Disable the Managed PoE+ Switch SNMP trap function on this page.
• SNMP Link Change
Traps
Enable or Disable the Managed PoE+ Switch SNMP Link Change trap function
on this page.
Button
: press this button to take effect.