User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
56
4.2.4.4 SNMP Community Table
The SNMP User Table provides to set SNMP community settings; the configured column is used to input the community name,
and select the group name for access group as the screen in Figure 4-2-9 appears.
Figure 4-2-9: SNMP Community Table Configuration Page Screenshot
The page includes the following fields:
Object Description
• Community Name
Configure the Managed PoE+ Switch community name information on this page,
the maximum length is 20 characters.
• Access Group
Select the exist access group.
Buttons
: press this button to take effect.
: press this button to delete.