User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
53
4.2.4.1 SNMP View Table
The SNMP View Table provide to set view rules for allow or deny access to certain MIB objects, the configured column is used
to input the view name, subtree OID and change the view type. The screen in Figure 4-2-6 appears.
Figure 4-2-6: SNMP View Table Configuration Page Screenshot
The Current column is used to show the SNMP View Table configuration.
Object Description
• View Name
Configure the Managed PoE+ Switch view name information on this web page, the
maximum length is 20 characters.
• Subtree OID
Configure the Managed PoE+ Switch Subtree OID information on this web page.
• View Type
Configure the Managed PoE+ Switch view type mode on this web page, the available
options are Included and Excluded.
Buttons
: press this button to take affect.
: press this button to delete.
Each view need to configure a view rule, otherwise it will affect the SNMP function.