User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
50
4.2.2 User Configuration
The User configuration includes the User Name,Password and Confirm Password. The configured column is used to view or
change the User Name and Password. The screen in Figure 4-2-3 appears.
Figure 4-2-3: User Configuration Page Screenshot
The Current column is used to show the user configuration.
Object Description
• User Name
Configure the Managed PoE+ Switch user name information on this web page, the
maximum length is 15 characters.
• Password
Configure the Managed PoE+ Switch password information on this web page, the
maximum length is 15 characters.
• Confirm Password
Confirm the Managed PoE+ Switch password information on this web page, the
maximum length is 15 characters.
Button
: press this button to take affect.
If you forget the new password after changing the default password, please press the “Reset”
button on the front panel of the Managed PoE+ Switch for ov
er 5 seconds and then release it.
The current setting including VLAN will be lost and the Managed PoE+ Switch
will restore to the
default mode.