User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
49
4.2.1 System Information
The System Infomation Page provides information for the current device information. System Information Page helps a switch
administrator to identify the hardware MAC address, firmware version and system uptime and also config the device name,
comment, location and contact information. The screen in Figure 4-2-2 appears.
Figure 4-2-2: System Information Page Screenshot
The page includes the following fields:
Object Description
• MAC Address
The Managed PoE+ Switch MAC Address information is provided here.
• Firmware Version
The Managed PoE+ Switch firmware version information is provided here.
• System Up Time
The Managed PoE+ Switch system active time information is provided here.
• Device Name
Configure the Managed PoE+ Switch device name information on this web page, the
maximum length is 15 characters.
• Comment
Configure the Managed PoE+ Switch comment information on this web page, the
maximum length is 15 characters.
• Location
Configure the Managed PoE+ Switch location information on this web page, the
maximum length is 15 characters.
• Contact
Configure the Managed PoE+ Switch contact information on this web page, the
maximum length is 15 characters.
Button
: press this button to take affect.