User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
48
4.2 System
Use the system menu items to display and configure basic administrative details of the Managed PoE+ Switch. Under the
system the following topics are provided to configure and view the system information. This section has the following items:
Access system web page, you can view system functions of the Managed PoE+ Switch, the screen in Figure 4-2-1 appears and
table 4-2-1 show the items of System.
Figure 4-2-1: Managed PoE+ Switch System Web Page
System Configuration
Item Description
System Information The Managed PoE+ Switch system information is provided here.
User Configuration
Configure the Managed PoE+ Switch username and password information on this page.
IP Configuration
Configure the Managed PoE+ Switch-managed IP/IPv6 information on this page.
SNMP Settings
Configure the Managed PoE+ Switch-SNMP functions on this web page.
NTP Settings Configure the Managed PoE+ Switch-NTP function on this web page.
Syslog Settings Configure the Managed PoE+ Switch-System log function on this web page.
Factory Default
Reset the Managed PoE+ Switch to default mode that excluding the IP address, User
name and Password.
Configuration Configure the Managed PoE+ Switch configuration file backup and restore.
Firmware Update This Page facilitates an update of the firmware controlling the Managed PoE+ Switch.
Table 4-2-1: Item Desciptions of System Web Page