User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
44
Figure 4-1-3: Web Main Page
Now, you can use the Web management interface to continue the switch management or manage the Managed PoE+ Switch by
Web interface. The Switch Menu on the left of the web Page let you access all the commands and statistics the Managed PoE+
Switch provides.
1. It is recommended to use Internet Explore 8.0 or above to access Managed PoE+ Switch.
2. The changed IP address take effect immediately after clicking the Save icon on the top
Switch Menu bar. You need to use the new IP address to access the Web interface.
3. For security reason, please change and memorize the new password after this first setup.