User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
38
3.4 Web Management
The Managed PoE+ Switch offers management features that allow users to manage the Managed PoE+ Switch from anywhere
on the network through a standard browser such as Microsoft Internet Explorer or Google Chrome. After set up your IP address
for the Managed PoE+ Switch, you can access the Managed PoE+ Switch 's Web interface applications directly in your Web
browser by entering the IP address of the Managed PoE+ Switch.
Figure 3-3: Web Management
You can then use your Web browser to list and manage the Managed PoE+ Switch configuration parameters from one central
location, just as if you were directly connected to the Managed PoE+ Switch's RJ45 console port. Web Management requires
either Microsoft Internet Explorer 8.0 or later.
The following web screen is based on the FGSW-2624HPS4; the display of the FGSW-2624HPS4 is
the same as that of the FGSD-1008HPS, FGSW- 1816HPS and FGSW-2624HPS.
Figure 3-4: Web Main Screen of Managed PoE+ Switch