User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
161
4.9.4.3 MLD Snooping Groups
This page allows you to configure the MLD Snooping Groups settings for Managed PoE+ Switch; the screen in Figure 4-9-23
appears.
Figure 4-9-23: MLD Snooping Groups Settings Configuration Page Screenshot
The page includes the following fields:
Object Description
MLD Snooping Static Group Configuration
• Group Address This column provides configuring the Group Address.
• Priority This column provides configuring the value for Priority, the default value is 0 and
the available range is
0
to
7
.
• Member Port This column provides configuring to select specific ports for MLD Snooping
Groups settings.
MLD Snooping Group Information
• Group Display per group list.
• State Display per group status.
• Member Port Display per group member port status.
• Priority Display per group priority status.
• Action
: press this button to edit specific MLD Snooping Groups Settings.
: press this button to delete specific MLD Snooping Groups Settings.
Button
: press this button to take effect.