User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
156
4.9.3.2 IGMP Snooping Router Ports Settings
This page allows you to configure the IGMP Snooping Router Ports settings for Managed PoE+ Switch as the screen in Figure
4-9-18 appears.
Figure 4-9-18: IGMP Snooping Router Ports Settings Configuration Page Screenshot
The page includes the following fields:
Object Description
• IGMP Snooping Static
Router Ports
This column provides configuring the IGMP Snooping Static Router Ports.
• IGMP Snooping
Dynamic Router Ports
This column provides configuring them IGMP Snooping Dynamic Router Ports.
Button
: press this button to take effect.